BDBMT - MACUBLACK PRE-DIP

  • MSDS: BDBMT
  • Manufacturer: MACDERMID INC
  • Product Name: MACUBLACK PRE-DIP
  • National Stock Number: 6850-00-141-2945
Product Identification

Product ID:MACUBLACK PRE-DIP
MSDS Date:01/01/1985
FSC:6850
NIIN:00-141-2945
MSDS Number: BDBMT

Responsible Party
MACDERMID,INC.
50 BROOKSIDE RD
WATERBURY, CT 06720
US

Emergency Phone: NONE

Cage: KO215

Contractor
MACDERMID,INC.
671 WATERBURY, CT 06720 US

Telephone: 203-575-5700

Cage: KO215

Ingredients

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: 90%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NON-HAZARDOUS COMPONENTS

Fraction By Weight: 10%

Hazards

Effects of Overexposure:IRRIT NOSE;PNEUMONTIS;BURNS EYES,SKIN;TEMPORARY
LOSS OF HAIR

First Aid

First Aid:EYES:FLUSH W/WATER FOR 15 MINUTES.CONTACT DR; SKIN-WASH
W/WATER.FOLLOW WITH VINEGAR.; INTERNAL; GIVE PLENTY OF WATER. GET
MEDICAL AID.

Fire Fighting

Fire Fighting Procedures:USE OF WATER ON MATERIAL GENERATES HI HEATS OF
REACTION
Unusual Fire/Explosion Hazard:CONTAINS STRONG OXIDIZING AGENT WHICH CAN
CAUSE COMBUSTION WHEN BROUGHT IN CONTACT WITH COMBUSTIBLES

Accidental Release

Spill Release Procedures:IMMED SWEEP UP SPILLED MATL & SHOVEL INTO
CONTAINERS. RINSE/FLUSH AREA W/LG AMTS OF WATER. NEUTRALIZE RINSE
WATER W/VINEGAR/DILUTE ACID.

Handling

Handling and Storage Precautions:STORE IN DRY AREA
Other Precautions:IF MATERIAL IS SPILLED ON CLOTHING, WASH IMMEDIATELY
W/ COLD WATER.

Exposure Controls

Respiratory Protection:DUST TYPE MASK
Ventilation:AS REQUIRED TO MAINTAIN AIR LEVEL BELOW TLV; MECHANICAL
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD
Other Protective Equipment:RUBBER APRON & BOOTS.
Supplemental Safety and Health
THIS ITEM IS PART B OF A MULTICOMPONENT KIT.

Chemical Properties

HCC:B1
Spec Gravity:2.13
Solubility in Water:COMPLETE
Appearance and Odor:WHITE GRANULAR POWDER,ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, OXIDIZABLE MATERIALS,FLAMMABLES.
Stability Condition to Avoid:SOURCES OF MOISTURE
Hazardous Decomposition Products:NO

Disposal

Waste Disposal Methods:NEUTRALIZE WITH SUITABLE AGENT.DISCARD IN
ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.